Editing ALGORITHM I (section)

==='''Step VI. Search for Tangents and Construction of the Auxiliary Attraction Model'''===

: '''6.1.''' Search for t.2’

: The program conducts a search for t.2’ (tangent, i.e., the rule N1 is removed for it), which will yield the LC, without any intersections with the price in the section between T.1 and T.2. Bars are checked from right to left starting from the bar t.2 to the bar t.1 inclusive (further – section 1-2). Point 2’ (further – t.2’) can coincide with t.2, if the LC through t.2 does not have extra price intersections on 1-2, however t.2’ cannot belong to the bar t.1.

:: '''6.1.1.''' If t.2’ is found 

:: If t.2’ is found (including if t.2’ coincides with t.2), then the program calculates the Line of goals by the tangent from t.2’ to t.4 (further -AL’). It is then checked whether the considered model has the status [The model is formed without point 6].

::: '''6.1.1.1.''' The model has the status [The model is formed without point 6] 

::: If the model has the status [The model is formed without point 6], the program proceeds to step 7.

::: '''6.1.1.2.''' The model does not have the status [The model is formed without point 6] 

::: If the model does not have the status [The model is formed without point 6], the program proceeds to sub-step 6.2.

::: '''6.1.2.''' If T.2’ is not found 

::: If t.2’ is not found (i.e., it is impossible to build such a line through points t.2’ and t.4, which will not contain extra points on section 1-2), then this is a model without an Auxiliary AM. Theprogram proceeds to step 7.

:: '''6.2.''' Search for t.3’ of the Auxiliary AM 

:: The program constructs a line from t.3 (or t.3’ if it exists) to t.5 (Trend Line of the Auxiliary Attraction Model, further - TLam) and checks it for the presence of price intersections in the section between t.3 and t.5.

::: '''6.2.1.''' Intersections are found 

::: If intersections are found, the line t.3/t.3’-t.5 in this case is not displayed on the chart. The program searches for such point 3’ of the Auxiliary Attraction Model (further t.3’am), through which it is possible to construct a line, which will not have price intersections on the section from t.3/t.3’ to t.5.

:::: '''6.2.1.1.''' If t.3’am is found

:::: If t.3’am is found, then the program constructs the Line of trend of the auxiliary model of attraction by the tangent from t.3’am to t.5 (further – TLam’) and calculates the level of intersection of AL’ and TLmp’ (further – calculated t.6). There are 2 options:

:::: '''6.2.1.1.1.''' If the calculated t.6 is found

:::: If the calculated t.6 is found, then a check is carried out for the minimum ratio of the time segment t.2-t.4 to the segment t.4-t.6 for the Auxiliary AM (should be within 0.5). If the check is not passed, then the model does not have an auxiliary MP (in this case LTmp is not displayed on the chart), the algorithm proceeds to sub-step 6.3. If the check is passed, the program checks whether the bar t.5 breaks through the level of the calculated p.6.

::::: '''6.2.1.1.1.A.''' If the bar t.5 does not break through the level of the calculated p.6 

::::: If the t.5  bar does not break through the level of the calculated p.6, then the program proceeds to sub-step 6.3. In the report is displayed: AUX AM

::::: '''6.2.1.1.1.B.''' If the t.5 bar breaks through the level of the calculated p.6

::::: If the t.5 bar breaks through the level of the calculated p.6, then this AM cannot be built and the program is looking for a new t.4. for this the next bar is checked according to sub-step 3.4., or in case if the model has a mark draw_flag this branch of the algorithm stops.

:::: '''6.2.1.1.2.''' The calculated point 6-th is not found

:::: The calculated 6-th is not found (i.e., the lines do not intersect). In this case TLam is not displayed on the chart. In the report is displayed: AUX NoAM The program proceeds to sub-step 6.3.

::: '''6.2.1.2.''' If t.3’am is not found

::: If t.3’am is not found, then in the report is displayed: AUX NoAM The program proceeds to step 7.

:: '''6.2.2.''' Intersections are not found 

:: Intersections are not found. In this case, the program calculates the level of intersection of TLam and AL’ (this is the level of the calculated p.6). There are 2 options according to sub-steps 6.2.1.1.1. and 6.2.1.1.2.

: '''6.3.''' Construction of the Auxiliary AM through t.5

: The program checks for the presence of t.5’ (the first possible local extremum in time on the section T.4-T.5). If T.5’ is found, in the report is displayed: AimsBlock5’ 5' If t.5’ is not, then in the report is displayed: AimsBlock5’ No5'

: If t.5' is present, the program will follow a similar process as sub-step 6.2 to construct the Trend Line for the Auxiliary Attraction Model. However, this time it will start from t.5' and, if necessary, use another suitable t.3' (referred to as t.3'am5'). If the program successfully constructs a Auxiliary AM through t.5' (indicating convergence of the lines), the model will be labeled as [The AM is built through t.5'] in the report. 
: The report will display: 
: AUX5’: AUX5’
: Alternatively, if the MP is not built through t.5', the program will display: 
: AUX5’: NoAUX5’ 
: After this, the program will proceed to step.7.